Dry cleaning systems are state-of-the-art machines that are used in various industries to remove chips, coolant and other contaminants from surfaces. The systems are characterized by high quality, reliability and user-friendliness.
They are environmentally friendly as they use no water and require no chemical cleaning agents. This means that no waste water is produced and no harmful chemicals are released into the environment. The systems are also energy-efficient and enable fast and intensive cleaning.
Dry cleaning systems are used in various industries, such as the automotive industry, the aerospace industry and many others.
This dry cleaning system is suitable for cleaning battery trays, gearboxes, crankcases and much more. A cycle time of up to 18 seconds can be achieved with this system.
Loading can be carried out via a gantry, belt, robot or manually. The maximum workpiece size is 700 mm x 500 mm x 400 mm.
The system has a size of 1300 mm x 1300 mm x 1400 mm measured from the top edge of the belt.
This dry cleaning system is suitable for cleaning cylinder heads, gearboxes, battery trays and much more. A cycle time of up to 45 seconds can be achieved with this system.
Workpieces can be loaded via a gantry, conveyor belt, robot or manually. The maximum size of the workpiece is 500 mm x 400 mm x 300 mm.
The system has a size of 1500 mm x 1200 mm x 1200 mm measured from the top edge of the belt.
This dry cleaning system is suitable for cleaning splined shafts, stators/rotors and axle shafts. A cycle time of up to 30 seconds can be achieved with this system.
Loading can be carried out using a gantry or robot. The size of the workpiece must not exceed 500 mm x oscillating circuit diameter x 250 mm.
The system has a size of 1500 mm x1200 mm x 1200 mm measured from the top edge of the belt.
This dry cleaning system is suitable for cleaning cylinder heads, profiles and battery trays. A cycle time of up to 25 seconds can be achieved with this system.
Loading can be carried out via a gantry, belt, robot or manually. The maximum size of the workpiece is 700 mm x 500 mm x 400 mm.
The system has a size of 2200 mm x 1400 mm x 1300 mm measured from the top edge of the belt.
The system is used for cleaning steel strip and is designed as a continuous system.
This system is loaded in a single pass. A belt speed of up to 20 m/s can be achieved. The width of the workpiece may be a maximum of 100-500 mm.
The system has a size of 2500 mm x 1500 mm x 1200 mm measured from the top edge of the belt.
The cleanCube has a chamber with a rotary cleaner with ionized air.
This system is loaded manually. The maximum size of the workpiece is 700 mm x 400 mm x 250 mm.
The system has a size of 1000 mm x 1000 mm x 1500 mm.
.png)